inVENTer Connect inner cover Скачать руководство пользователя страница 7

Страница: 7 / 104

SYSTEM OVERVIEW

inVENTer Connect controller platform | Operating instructions

System overview

The inVENTer Connect controller platform is an innovative control system for decentralised

iV ventilation unitss with heat recovery featuring the use of the Connect inner cover from

inVENTer GmbH.

Up to 16 devices can be integrated into the inVENTer Connect controller platform.

Communication between the control unit and the devices takes place:

• wirelessly via the RF868 MHz network or

• via a RS485 data cable.

The inVENTer Connect controller platform can be assembled with the following devices,

depending on individual requirements:

2.1 Easy Connect e16 controller (incl. humidity/temperature sensor)

The Easy Connect e16 controller (in the following text

"controller") is the control centre for the inVENTer Connect

controller platform. It is used to control and program the

individual devices.

The controller has a display screen and keys for quick access,

making it possible to use it as a programming unit.

The controller also serves as the system interface for the

"inVENTer Mobile" app (Android / iOS). Communication between

the mobile device and the controller takes place via Bluetooth

Low Energy (BLE).

There are two ways to operate the inVENTer Connect controller platform:

• Directly via the controller;

• Via the "inVENTer Mobile" app in conjunction with the controller.

In order to be able to use the full range of functions of all devices in the system in the best possi-

ble way, we recommend operating and configuring the controller via the "inVENTer Mobile" app.

The capacitive sensor keys available on the programming unit can be used to make quick settings

for the ventilation system.

The status display (LED, multi-coloured) shows the status of the controller by means of lights in

various colours (



3.1: Controller operation, General).

The mode key can be used to trigger system configurations. The different actions are triggered by

holding the mode key for different lengths of time.

The display screen shows all the information about the ventilation system (ventilation system in

normal operation) or, when changing/manually overriding settings that determine function-defining

settings, setting screens are displayed.

Содержание Connect inner cover









































































































Результаты поиска

Содержание Connect inner cover

Отзывы:

Похожие инструкции для Connect inner cover

Бренды по названию

Популярные бренды

inVENTer Connect inner cover, Руководство по эксплуатации

Результаты поиска

Содержание Connect inner cover

Отзывы:

Похожие инструкции для Connect inner cover

Бренды по названию

Популярные бренды