Invasix BodyTite, Руководство по обслуживанию

Страница: 17 / 52

Invasix BodyTite™ Service Manual DO600463F 0344 Page 17 of 52
The System is designed for installation in a clinic environment. To install the System
perform the following tasks:

Unpack the System.

Check the System and all its components for visual damage.

Connect Footswitch to the footswitch connector

Connect the Power Cord to the System inlet.

Plug the System Power Cord into an appropriate electrical outlet.
Moving the System
To move the System within the facility:

Turn the System off.

Disconnect the Power Cord.

Put Footswitch with cable to the pocket located on the back panel of the system

Release the wheel brakes.

Slowly push or pull the System using the handle.

Lift the System to the vehicle and lay it carefully on its side handles.
Never lift, pull or push the System using the operating panel. Always
use the handles when moving the System.
Disposal of System
To comply with European Commission Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE) and other country and state regulations, please DO NOT
dispose of this equipment in any location other than designated locations.