Invacare Platinum Mobil, Руководство пользователя

Страница: 35 / 72

Usage
Alarm Text
If an alarm condition exists, text describing the alarm will be shown
on the display screen.
Refer to Alarm Conditions in Troubleshooting for more detail on
alarm conditions and related alarm text.
4.9 Adjusting the Pulse Flow Setting
CAUTION!
Risk of Minor Injury or Discomfort
It is very important to select the prescribed oxygen flow
setting. This will ensure you will receive the therapeutic
amount of oxygen according to your medical condition:
–
DO NOT increase or decrease the flow setting unless
a change has been prescribed by your physician or
therapist.
–
The therapeutic effectiveness of the prescribed oxygen
flow setting should be periodically reassessed.
–
Use only the length of cannula that was used to
determine the prescribed oxygen flow setting.
– The pulse flow settings of this concentrator might not
correspond to continuous flow oxygen.
– The settings of other models or brands of oxygen
therapy equipment do not correspond to the settings
of this concentrator.
1. With the concentrator running, press the flow selection button
B
to increase the pulse flow setting by one increment.
2. Press the flow selection button additional times, as needed, until
your prescribed flow setting (P1 to P4) is shown on the display
screen
C
.
The concentrator has four pulse flow settings. When the
maximum pulse flow setting P4 is reached, the pulse flow
setting returns to setting P1 with the next button press.
Each time the flow setting is changed, an audible beep will
occur and the display screen backlight will turn on for five
seconds.
If a message other than the pulse flow setting is shown
on the display screen, the adjusted pulse flow setting will
temporarily be displayed for five seconds after pressing the
flow selection button.
The concentrator pulse flow setting at power-up will be the
same flow setting selected the last time the unit was turned
off.
1194969-A-00 35