Invacare Formula CG Elevate, Руководство пользователя

Страница: 30 / 95

Invacare® Formula™ CG Seating
The joystick is factory installed on the right side of the
wheelchair. To reposition the joystick onto the left side of
the wheelchair, refer to Repositioning the Joystick in the
wheelchair base user manual.
1. Turn the adjustment lock lever A to release the adjustment lock
from joystick mounting tube
B
.
2. Slide joystick mounting tube to the desired position.
3. Turn the adjustment lock lever to secure the adjustment lock
to the joystick mounting tube.
6.3 A Note About Drive Lock-Out
WARNING!
Risk of Death or Serious Injury
Operating the wheelchair with the seat
tilted/reclined/back angle position beyond 20°
can cause instability resulting in death or serious injury
from the wheelchair tipping over.
– NEVER operate the wheelchair or elevate/lower the
seat while in any tilted/reclined/back angle position
over 20° relative to the vertical position. If the
drive lock-out does not stop the wheelchair from
operating or the seat from elevating/lowering in
a tilt/recline/back angle position over 20° relative
to vertical, DO NOT operate the wheelchair or
elevate/lower the seat. DO NOT attempt to adjust
the drive lock-out. Have the wheelchair serviced by a
qualified technician.
–
The wheelchair user MUST have a clear line of sight
to drive safely. On initial chair delivery and after
adjusting the back angle, drive lock-out switch tilt
system or recline system, tilt and recline the seat back
to the farthest driving position IMMEDIATELY before
drive lock-out engages and ensure there is a clear line
of sight present in which to drive the wheelchair. If a
clear line of sight is not present, have the back angle
repositioned or readjust the lockout angle such that
safe driving with a clear line of sight is achieved.
One of the following will occur when the drive lock-out feature has
been activated:
•
CMPJ+ Joysticks Only - TILT WARNING or SPM Inhibited
displays on the joystick or display unit.
30 1143155-R-01