Invacare Formula CG Elevate, Руководство пользователя

Страница: 59 / 95

Setup/Maintenance
7.15.2 Installing the Adjustable Heel Loop
When installing the adjustable heel loop, wrap the hook and
loop strips wrap around the front rigging tube as shown.
This will ensure the hook strip is facing towards the rear
of the wheelchair.
1. Using the mounting screw A , spacer B , washer (not used on
deluxe flip up footplate)
C
and cap nut
D
secure the adjustable
heel loop
E
to the footplate
F
.
2. Secure the hook
G
and loop
H
strips around the lower footrest
tube (I). Refer to Adjusting the Adjustable Heel Loop.
7.15.3 Adjusting the Adjustable Heel Loop
1. If necessary, pull to release the hook
G
and loop
H
strips
securing the adjustable heel loop E to the lower footrest tube I .
2. Determine the heel loop length and depth appropriate for the
wheelchair user.
A red line
J
is included on the hook strip to help
indicate when the hook and loop strips overlap by 1-1/2
inches (38 mm)
K .
3. Ensuring at least 1-1/2 (38 mm)
K
inches of the loop strip
connects to the hook strip, firmly press the hook and loop strips
together to secure the adjustable heel loop around the lower
footrest tube.
4. If necessary, repeat STEPS 1-3 to adjust the remaining adjustable
heel loop.
7.16 Installing/Removing Flip Back Armrests
Armrest Release Lever
Locked (Vertical) Position Unlocked (Horizontal) Position
WARNING!
–
Make sure the flip back armrest release and height
adjustment levers are in the locked position before
using the wheelchair.
1143155-R-01 59