InterVac CS-RM, Инструкция по установке и эксплуатации

Страница: 11 / 13

11
C.2. To change motor filter, Replacement Part # Y22
1. Remove FRONT PANEL with DUST BAG .
2. On the left side, inside the vacuum chamber, you will see the filter with the arrow pointing
towards the back wall .
3. Replace the filter with a new or cleaned filter, with the arrow pointing towards the back wall
check that the filter stays on the left side of the top and bottom frame.
4. If the filter is dirty you can wash in mild soap by hand.
a) Do not clean in washing machine . Let filter dry completely and reuse as needed.
CAUTION:
DO NOT PICK UP LIQUIDS, LIT CIGARETTES, HOT ASHES, RAZOR BLADES,
NEEDLES, PINS OR OTHER SHARP OBJECTS
Attaching Front Panel and Dust Bag to Vacuum
Picture D Picture E Picture F
Insert motor filter first, then
slide dust bag into vacuum
chamber.
Slide front panel with left
side into the vacuum frame.
Watch out that the bag does
not get champed between
front panel and frame!
Snap front panel down into
the frame and push the latch
to the right to lock.
C.3. How to change the Y11 dust bag. DO NOT REUSE DUST BAGS