INTERSPIRO Spiroguide II, Руководство пользователя

Страница: 13 / 48

13
5.
Check the yellow and red LEDs (section 7, Fig. 7-A) on the display and the yellow
and red BAC-light. If applicable check green, yellow and red LEDs on the HUD.
CHECK
LEDs
6.
Close the cylinder valve and press the backlight button. Make sure to completely
close the cylinder valve before pressing the backlight button.
CLOSE CYL
PRESS BLACK
7.
The SpiroGuide II performs a leakage test.
LEAKAGE
TEST
8.
For Tally key activated SpiroGuide II the display will read according to the figure
below. If the tally is not inserted from the start the display will first read “INSERT
TALLY“ and then “REMOVE TALLY“ when the tally has been inserted.
REMOVE
TALLY
9.
Shake the Digital Display Unit when the display reads according to the figure
below. Alarm sound will stop when DDU has been shaken
SHAKE
DDU
10.
Do not move the Digital Display unit when the display reads according to the
figure below. The pre alarm sound and full alarm sound is tested
DO NOT SHAKE
DDU