INTERSPIRO Spiroguide II, Руководство пользователя

Страница: 15 / 48

15
18.
The display will stop and show the results of the test until the backlight button is
pressed. See the section titled “Test Results” above.
19.
The display will toggle between the two figures below. To shut down the
SpiroGuide II press the backlight button. To go into Run mode, switch off the
positive pressure of the breathing valve and open the cylinder valve
SHUT OFF PP
OPEN CYL
->RUN
CLOSE DOWN?
FIT TALLY
PRESS BLACK
7 DURING USE
DIGITAL DISPLAY
Optional tally
Digital display
with yellow and
red backlight
Panic Button
Red and yellow LED
Backlight /
Scroll button
Fig. 7-A
When the unit is in Run mode with the ADSU/PASS activated (see section 9), the
yellow LED flashes.
DURING USE, THE DIGITAL DISPLAY CAN SHOW THREE DIFFERENT VALUES:
1.
Cylinder pressure in Bar or PSI
2.
Calculated remaining time in Minutes
3.
Absorbed temperature in Celsius or Fahrenheit
4.
Cylinder pressure graph in quarters
Depending on the configuration, the display can show one, two, three or all four of
these values. Furthermore, either of these four values can be shown as the default,
second third and fourth priority value.
Pressing the backlight button (Fig. 7-A) activates the backlight of the display for four
seconds. Pressing the backlight button once more while the backlight is lit toggles to
the next value according to configured priorities.