Combo Output Module
Product Manual
©2017 INTERRA
32
PM131126001A
PARAMETER
DESCRIPTION
VALUES
No Reaction/Last Mode: The system remains the
last operating mode received.
Summer Mode: The operation mode is summer
at startup.
Winter Mode: The operation mode is winter at
startup.
Winter Mode
Mode of Operation of Valve
Drive
This parameter determines the type of contact
output.
Normally Open: The relay works as normally
open contact.
Normally Close: The relay works as normally
close contact.
Normally Open
Normally Close
Type of Manipulated Variable
This parameter determines the type of data used
for the control of the valve.
Switching (1-Bit): The valve is controlled via On
and Off telegrams.
Continuous (1-Byte): The valve is controlled by
percentages values.
Switching (1-Bit)
Continuous
(1-
Byte)
Lower Limit (%)
2
This parameter set the value for the output to go
back to off. It must be a value smaller than the
upper limit.
10
(0-100)
Upper Limit (%)
2
This value set the value of the valve opening. It
must be a value greater than 0.
10
(0-100)
Forced Position
This parameter determines if the output can be
forced via an additional “forced position” object or
not.
Disabled: This option is disabled.
Forced Position On Value 0:
When the “forced
position” communication object takes the value 0,
status changes at the output are not transmitted.
Forced Position On Value 1: When the “forced
position” communication object takes the value 1,
status changes at the output are not transmitted.
Disabled
Forced Position On
Value 0
Forced Position On
Value 1
During Forced Position
3
This parameter set the value of the output while it
is forced.
No Reaction/Last State: The output remains the
last value received.
OFF: The output is forced to 0.
ON: The output is forced to 1.
No Reaction/Last
State
OFF
ON
After Forced Position
3
This parameter set the value of the output after a
forced.
No Reaction/Last
State
