Interphone tribe, Инструкция по эксплуатации, Страница: 32 / 243

26
b) Battery
c) Mains battery charger
d) Instructions for use
e) Belt clip
Technical specifications
Standard PMR446
Operating range: 446.00625 – 446.09375 MHz
Operating channels: 8
CTCSS codes: 38 per channel
DCS codes: 83 per channel
Channel spacing: 12 KHz
Modulation type: FM
Transmitting power: 500mW
Range: up to 12km in an open field
Performance: 20 hours (5% transmitting, 5% receiving, 90% standby)
Battery: Lithium battery pack 3.7V 1000mAh (BSI3650)
Weight (with battery): 96 g
Care and maintenance
If you do not use TRIBE for a long time, charge the battery every 2 to
3 months to prevent damage.
To clean, use a water damp sponge and mild soap if necessary. Do
not use solvents or degreasing products.
Important: remove the batteries before cleaning to prevent water
from seeping through the connector on the bottom and damaging the
control unit or electrical contacts. Make sure you close the rubber
cap well protecting the micro USB connector.
Assistance and Warranty
The product is guaranteed in compliance with the laws and
regulations applicable in the Countries where it is distributed.
For assistance or product spares, please contact the dealer where
you purchased it
1.0 Preparation
Fitting and charging the battery
Before you can use TRIBE you need to charge the battery supplied
EN