Intermec PM43, Руководство пользователя

Страница: 49 / 168

Chapter 2 — Set Up the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 35
8 Configure the cutter:
•
If you have an icon printer, use PrintSet 5 or a printer command
language to configure the cutter.
• If you have a full touch printer, continue with the next step.
9 After the printer finishes starting up, press .
10 Select Settings > Printing > Cutter .
11 In the Cutter Control options, select Automatic .
You can also enable Partial Cut from the Cutter menu.
12 Press to save your settings.
13 Configure the start and stop adjust settings.
About Ribbon
Thermal transfer printing provides a durable printout that is less
vulnerable to chemicals, heat, and sunlight than direct thermal
printing. Make sure you select a ribbon type that matches the media
you are using and that you configure the printer for thermal transfer
media.
The printer supports thermal transfer ribbon rolls with the ink-coated
side facing either inward or outward. To determine which type of
ribbon you have, use a pen or other sharp object to scratch through the
ribbon against a piece of paper. If you see a mark on the paper, your
ribbon is wound ink out.
Determining Whether Your Ribbon is Wound Ink In or Ink Out
*OLPVU
*OLJO