Interlogix UltraView IP PTZ 36X, Руководство пользователя

Страница: 60 / 82

Chapter 7: Alarm setup
56 UltraView IP PTZ 36X Camera User Manual
E-mail link Check to send an e-mail when an alarm is detected.
Trigger recording Check the input option shown to select the video channel
from which to start recording.
Trigger alarm output Check which of the camera’s alarm outputs is triggered:
Alarm Output 1 or Alarm Output 2. More than one output
can be selected.
6. Click Save to save changes.
Select the group of user-defined settings that you want to delete and click OK .
Event schedule for alarms
Use the deployment time menu to schedule when events can be registered. It
specifies when the alarm inputs and outputs as well as motion detection and
tamper alarms (called “Shelter alarms” here) are operational. Outside of these
scheduled periods the system cannot register events. You can configure up to
four event periods a day.
For the event schedule to be operational, you must also define the motion
detection parameters (see “Motion detection” on page 54) as well as the alarm
input and output parameters (see “Alarm set up” on page 57).
Figure 26: Deployment time screen
To define an event schedule:
1. Open the Deployment Time folder to see its screen.