Installation Guide
43
Back box
Protective foam
Sticker
Lower dome
2.
Remove the protective
lens cover, foam and
sticker from
the dome drive.
3.
Set
the address and baud rate for the HD-TVI dome.
See
page 12.
4. Attach the
lower dome to the back box. R
otate it
clockwise to secure it.
5. Using the drill template, drill a hole on the ceiling.
6. Connect the cables.
Make sure the video cable and control wire have been
connected to the corresponding interfaces.
Содержание TVP-6101
