Interlogix TVP-6101, Руководство по установке, Страница: 51 / 60

Installation Guide 47
2. Wire the dome.
Route t he cables of the dome either from the top or the
side o f the back box. For the cables routed from the top
of the back box, you must drill a cable hole in the ceiling.
3. Surface mounting:
A. Rotate t he lower dome counterclockwise to separate
it from the back box.
B. Remove the protective lens cover, foam and sticker
from the dome drive.
C. Set the address and baud rate for the PTZ.
D. Attach the lower dome to the back box and rotate it
clockwise to secure it.
E. Use the mounting base as a template to mark four
screw holes onto the ceiling.