Copyright
© 2018 United Technologies Corporation,
Interlogix is part of UTC Climate,
Controls & Security
, a unit
of United Technologies Corporation. All rights reserved.
Disclaimer
Information in this document is subject to change without
notice. No part of this document may be reproduced or
transmitted in any form or by any means,
electronic or
mechanical, for any purpose, without the express written
permission of UTC Fire & Security Americas Corporation, Inc.
Trademarks and
patents
Trade names used in this document may be trademarks or
registered trademarks of the manufacturers or
vendors of the
respective products.
Manufacturer
Interlogix
2955 Red Hill Avenue, Costa Mesa, CA 92626
-
5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
FCC compliance Class A:
This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
FCC conditions
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This Device must accept any interference received,
including interference that may cause undesired operation.
ACMA compliance Notice!
This is a Class A product. In a domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.
Canada
This Class A digital apparatus complies with CAN ICES
-003
(A)/NMB
-3 (A).
Cet appareil numérique de la classe A est conforme à la
norme CAN ICES
-
003 (A)/NMB
-3 (A).
Содержание TVP-6101
