Interlogix TVP-6101, Руководство по установке, Страница: 35 / 60

Installation Guide 31

Protocol settings
Use SW 2 switches numbers 3, 4 and 5 to set the PTZ
protocol. Refer to Table 2 below:
Table 7: Set the dome protocol
Protocol
SW2 switch no.
3 4 5
Interlogix RS -485 OFF OFF OFF
PROTOCOL_PELCO_P ON OFF OFF
PROTOCOL_PELCO_D OFF ON OFF
PROTOCOL_DIGIPLEX ON ON OFF
PROTOCOL_RS422_ASCII OFF OFF ON
PROTOCOL_BOSCH_CODE OFF ON ON
PROTOCOL_AD_CODE ON ON ON

Output signal settings
Use SW2 switch number 7 to set the output signal of the PTZ.
R efer to Table 8 below:
Table 8: Set the HD-TVI Mode
HD-TVI mode
SW2 switch no.
7
TVI OFF
960H ON