Interlogix TruVision TVR-1104-1T/EA, Руководство пользователя

Страница: 60 / 158

7BChapter 8: Operating instructions
54 TruVision DVR 11 and DVR 11c User Manual
Item Description
14. Focus + and - Use to control focus of camera lens.
15. Playback control Use to control playback (Rewind, Pause, Play, and Fast Forward).
16. Search Open the Search menu.
17. Replay Replay the selected file from the beginning.
18. Eject Eject the CD or DVD disk.
19. Archive Press once to enter quick archive mode. Press twice to start archiving.
Aim the remote control at the IR receiver located at the front of the unit to test
operation.
To connect the remote control to the DVR:
1. Press the Menu button on the front panel or right-click the mouse and select
the Menu button. The main menu window appears.
2. Click Display Mode Settings > Monitor .
3. Check the device address value. The default value is 255. This device
address is valid for all IR controls.
Note : The DVR will respond to any remote control that has an address
between 1 and 255.
4. On the remote control press the Device button.
5. Enter the device address value. It must be the same as that on the DVR.
6. Press the OK button on the remote control.
To place batteries into the IR remote control:
1. Remove the battery cover.
2. Inse
rt the batteries. Make sure that the positive (+) and negative (−) poles are
correctly placed.
3. Replace the battery cover.
Troubleshooting the remote control:
If the IR remote control is not functioning properly, perform the following tests:
• Check the battery polarity.
• Check the remaining charge in the batteries.
• Check that the IR remote control sensor is not masked.
If the problem still exists, please contact your administrator.