Interlogix NXG-1820-EUR Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 176

Interlogix NXG-1820-EUR Скачать руководство пользователя страница 40

28

xGenConnect Installation and Programming Guide

NXG-001 Plastic Enclosure

The NXG-001 features a DIN rail for mounting xGen modules, a tamper switch,
and integrated cable management.

The enclosure should be installed in accordance with EN 50131-1 Environmental
Class II to provide operating conditions within:

• Temperature range: −10 to +55°C.

• Humidity range: Average 93% relative humidity, noncondensing

The lid can be removed by releasing the two screws using the supplied Allen key.

Note:

The housing cover must be installed with the clips on top.

Refer to drilling template provided with enclosure for mounting instructions.

To install a module, release the locking tab(s) and place on the DIN rail then
push the locking tab(s) to secure the module. To remove a module, use a small
flat-blade screwdriver to release the locking tab(s) on the xGen module then
remove from the DIN rail. Refer to module installation manual for further details.

«
...
38
39
40
41
42
...
»

Содержание NXG-1820-EUR

















































































































































































Отзывы:

Нет отзывов