Interlogix NXG-1820-EUR Скачать руководство пользователя страница 116

Страница: 116 / 176

104

xGenConnect Installation and Programming Guide

5. Click the Options/Timers tab

6. Select the user options that you want to apply to this permission. Descriptions

of each item are available in

xGen Reference Guide

Next

Program Users or Devices

Programming Instructions for Menus

Goal

Create a list of menus that a user or device has access to on the xGenConnect
system.

Pre-conditions

None.

Notes

• The menus that will be available are the ones that the device has permission

to display AND the ones that a user has access to, at the specified time and
date which is controlled by Schedules.

• Users have up to 4 levels of access and devices have up to 2. This allows

very sophisticated and fine grained control of access.

• 64 custom menus can be created. The preset ones will help you create

a system quickly without needing to modify these.

Содержание NXG-1820-EUR

















































































































































































Результаты поиска

Содержание NXG-1820-EUR

Отзывы:

Interlogix NXG-1820-EUR, Инструкция по установке и программированию, Страница: 116 / 176

Результаты поиска

Содержание NXG-1820-EUR

Отзывы: