Interlogix NXG-1820-EUR Скачать руководство пользователя страница 159

Страница: 159 / 176

xGenConnect Installation and Programming Guide

147

9. If you want to program an action result, click the Result tab.

10. Select the Category, Type, Start and End Range.

11. Test the Action by satisfying the Event Logic and checking the desired

response.

Next

• Program the device you want to monitor the Action if needed.

• If you want to control an Output, go to that Output and program it to follow the

Action.

• If you want a user or device to have access to the action, then program Action

Groups and Permissions.

Programming Instructions for Action Groups

Goal

Create a list of actions a user or device has access to.

Pre-conditions

Program the actions you want to use.

Notes

• See

xGen Reference Guide

for more details on Actions.

• Action Groups can allow you to create a convenient menu for a user to trigger

specific Actions from NXG-18xx.

• Permissions control what actions a User or Device has access to.

• Both the User AND Device need to have access to the desired Action for it to

be displayed on a NXG-18xx screen.

Содержание NXG-1820-EUR

















































































































































































Результаты поиска

Содержание NXG-1820-EUR

Отзывы:

Interlogix NXG-1820-EUR, Инструкция по установке и программированию, Страница: 159 / 176

Результаты поиска

Содержание NXG-1820-EUR

Отзывы: