Interlogix NXG-1820-EUR Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 176

Interlogix NXG-1820-EUR Скачать руководство пользователя страница 100

88

xGenConnect Installation and Programming Guide

13. Test the scene to check if the behavior is desired.

Special Scene Triggers: Geosphere / Geolocation Entered Exited

Ul app can send the panel a message when a

user’s mobile phone has

entered (within 200 meters) or left (outside 300 meters of) a physical area. This
can then be used as a scene trigger. For example, turn on an external security
light when the user arrives home.

To enable this scene trigger:

1. Open Ul app.

2. Click (i) Site Info button.

3. Click Location Services.

4. Click Edit Map.

5. Zoom and move the map to the desired location.

6. Click Save Map.

7. Enable

“Geo Actions”, this will send the message to the panel.

8. Enable

“Check Status on Leaving” if you want a reminder notification from the

app when it detects you have left the home location. This feature is
independent of the

“Notification Services” feature.

9. Click Back.

10. Click Sites.

Special Scene Triggers: Sunrise Sunset

The panel can trigger scenes based on the sunrise/sunset schedule specific to
a geographical location. For example, turn on an external security light
automatically at sunset.

«
...
98
99
100
101
102
...
»

Содержание NXG-1820-EUR

















































































































































































Отзывы:

Нет отзывов