Interlogix NXG-1820-EUR Скачать руководство пользователя страница 153

Страница: 153 / 176

xGenConnect Installation and Programming Guide

141

Programming Instructions for Zone Reporting

Goal

Direct event messages (e.g. alarm, bypass, tamper) from zones to specific
destinations.

Pre-conditions

• The zone must have valid zone options programmed (see “Programming

Instructions for Zones

” on page 112), by default you should not need to

modify these.

• The zone must be allocated a valid Area Group (see “Programming

Instructions for Zones

” on page 112).

• Channels and Channel Groups must be programmed (see “Programming

Instructions for Channels

” on page 137).

Notes

• Each zone may be allocated to multiple Areas through an Area Group.

• Events will be sent to the lowest numbered Area in the Area Group.

• A zone may have a Second Zone Profile, when this becomes active all events

will be sent to the Area Group programmed in the second profile.

Programming Sequence

3. Zones

4. Areas

→

a) Area Options

b) Area Timers

c) Area Reporting

12. Area Groups

7. Schedule

18. Channel Groups

Содержание NXG-1820-EUR

















































































































































































Результаты поиска

Содержание NXG-1820-EUR

Отзывы:

Interlogix NXG-1820-EUR, Инструкция по установке и программированию, Страница: 153 / 176

Результаты поиска

Содержание NXG-1820-EUR

Отзывы: