Interlogix NXG-1820-EUR Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 176

Interlogix NXG-1820-EUR Скачать руководство пользователя страница 137

xGenConnect Installation and Programming Guide

125

Example

For example, you could create a 24/7 schedule and then have this schedule
follow an action. Next assign a keypad permission this schedule. Now based on
what the action does, we can conditionally enable or disable a keypad. This
provides a high level of flexibility and multiple sets of rules using actions can be
set up like this.

Programming Instructions for Arm-Disarm

Goal

Automatically Arm and Disarm your xGenConnect system.

Pre-conditions

Areas have been programmed.

Notes

• The Arm-Disarm will function as if it is the user you select. You will need to

program valid user permissions including Area Groups, User Schedule,
Profile levels, and active date and time.

• Creating a new user only for the purpose of Arm-Disarm will make it easier to

maintain.

• Use defaults for Schedules, Area Groups and Permissions for faster

programming.

• xGenConnect will sound a warning prior to the Arm-Disarm from arming an

Area. This is set in Areas > Area Timers > Area Type Delay.

• If a user with Area Type Override option disarms an Area with Arm-Disarm,

then the Arm-Disarm will no longer function on that Area. To re-enable Arm-
Disarm that Area must be manually armed.

Programming Sequence

4. Areas

12. Area Groups

11. Permissions

a) Area Options

→

→

a) Groups

→

b) Area Timers

b) Options/Timers

c) Area Reporting

13. Menus

7. Schedule

12. Area Groups

18. Channel Groups

18. Channel Groups

x. Action Groups

1. User

7. Schedules

9. Arm/Disarm

a) Main

→

→

b) Advanced

11. Permissions

14. Holidays

7. Schedules

7. Schedules

18. Channel

«
...
135
136
137
138
139
...
»

Содержание NXG-1820-EUR

















































































































































































Отзывы:

Нет отзывов