Chapter 2: Console CLI management
6
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
If required, you can change these settings after you log on. This management method
is often preferred because you can remain connected and monitor the system during
system reboots. Also, certain error messages are sent to the serial port, regardless of
the interface through which the associated action was initiated. A Macintosh or PC
attachment can use any terminal-emulation program for connecting to the terminal
serial port. A workstation attachment under UNIX can use an emulator such as TIP.
Log on to the console
After the terminal is connected to the device, power on the managed switch. “Running
testing procedures” appears in the terminal display. Then, a user name and password
prompt appears. The factory default user name and password are shown as follows
and the login screen appears.
Username:
admin
Password:
admin