Chapter 4: Commands for CLI configuration
152
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
<Mepid : uint>
Peer MEP-ID value
last-n
The last N dalays used for average last N calculation. Min value is 10.
<Lastn : uint>
The last N value
Default:
0
Usage Guide:
To configure
Delay Measurement
of
MEP
Example:
To configure
Delay Measurement
of
MEP 1
as below table
.
Switch# configure terminal
Switch (config)#
mep 1 dm 5 rdtrp interval 10 last-n 10
mep <Instance> dm ns
Command:
mep <Instance> dm ns
mep
Maintenance Entity Point
<Instance>
The MEP instance number.
dm
Delay Measurement
ns
Nano Seconds
Default:
us
Usage Guide:
To configure
Delay Measurement
of
MEP
Example:
To configure
Delay Measurement unit (ns)
of
MEP 1
as below table
.
Switch# configure terminal
Switch (config)#
mep 1 dm ns
mep <Instance> dm overflow-reset
Command:
mep <Instance>
dm overflow-reset
mep
Maintenance Entity Point
<Instance>
The MEP instance number.
