Interlogix NS3702-24P-4S Скачать руководство пользователя

Страница: 141 / 405

141

The Page includes the following fields:

Object

Description



Delete

To delete a Group Name to VLAN map entry, check this box. The entry will be

deleted on the switch during the next Save



Group Name

A valid Group Name is a string of atmost 16 characters which consists of a

combination of alphabets (a-z or A-Z) and integers(0-9), no special character is

allowed. Whichever Group name you try map to a VLAN must be present in

Protocol to Group mapping table and must not be preused by any other existing

mapping entry on this Page.



VLAN ID

Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges

from 1-4095.



Port Members

A row of check boxes for each port is displayed for each Group Name to VLAN ID

mapping. To include a port in a mapping, check the box. To remove or exclude

the port from the mapping, make sure the box is unchecked. By default, no ports

are members, and all boxes are unchecked.



Adding a New Group to

VLAN mapping entry

Click “Add New Entry” to add a new entry in mapping table. An empty row is

added to the table, the Group Name, VLAN ID and port members can be

configured as needed. Legal values for a VLAN ID are 1 through 4095.

The “Delete” button can be used to undo the addition of new entry.

Buttons

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

Auto-refresh

: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the Page immediately.

Содержание NS3702-24P-4S






















































































































































































































































































































































































































Результаты поиска

Содержание NS3702-24P-4S

Отзывы:

Похожие инструкции для NS3702-24P-4S

Бренды по названию

Популярные бренды

Interlogix NS3702-24P-4S, Руководство пользователя

Результаты поиска

Содержание NS3702-24P-4S

Отзывы:

Похожие инструкции для NS3702-24P-4S

Бренды по названию

Популярные бренды