Interlogix NS3702-24P-4S Скачать руководство пользователя

Страница: 117 / 405

117

tagged on egress, they will be tagged with a C-tag.

■

S-Port:

On ingress, frames with a VLAN tag with TPID = 0x8100 or 0x88A8 get

classified to the VLAN ID embedded in the tag. If a frame is untagged or

priority tagged, the frame gets classified to the Port VLAN. If frames must

be tagged on egress, they will be tagged with an S-tag.

■

S-Custom-Port:

On ingress, frames with a VLAN tag with a TPID = 0x8100 or equal to the

Ethertype configured for Custom-S ports get classified to the VLAN ID

embedded in the tag. If a frame is untagged or priority tagged, the frame

gets classified to the Port VLAN. If frames must be tagged on egress, they

will be tagged with the custom S-tag.



Ingress Filtering

Hybrid ports allow for changing ingress filtering. Access and Trunk ports always

have ingress filtering enabled.

■

If ingress filtering is enabled (checkbox is checked), frames classified to a

VLAN that the port is not a member of get discarded.

■

If ingress filtering is disabled, frames classified to a VLAN that the port is

not a member of are accepted and forwarded to the switch engine.

However, the port will never transmit frames classified to VLANs that it is not a

member of.



Ingress Acceptance

Hybrid ports allow for changing the type of frames that are accepted on ingress.

■

Tagged and Untagged

Both tagged and untagged frames are accepted.

■

Tagged Only

Only tagged frames are accepted on ingress. Untagged frames are

discarded.

■

Untagged Only

Only untagged frames are accepted on ingress. Tagged frames are

discarded.

Egress Tagging

This option is only available for ports in Hybrid mode. Ports in Trunk and Hybrid

mode may control the tagging of frames on egress.

■

Untag Port VLAN

Frames classified to the Port VLAN are transmitted untagged. Other

frames are transmitted with the relevant tag.

■

Tag All

All frames, whether classified to the Port VLAN or not, are transmitted

with a tag.

Содержание NS3702-24P-4S






















































































































































































































































































































































































































Результаты поиска

Содержание NS3702-24P-4S

Отзывы:

Похожие инструкции для NS3702-24P-4S

Бренды по названию

Популярные бренды

Interlogix NS3702-24P-4S, Руководство пользователя

Результаты поиска

Содержание NS3702-24P-4S

Отзывы:

Похожие инструкции для NS3702-24P-4S

Бренды по названию

Популярные бренды