Intergraph TD-x10 Setup, Справочное руководство системы

Страница: 46 / 98

36
Board Guide
Assembly
Top Screw
Side Screw
PCI Slot 6
Board Guide
4. Remove the existing SIMMs from their sockets before adding new ones.
5. Remove the SIMMs from their antistatic bag and install them in this order:
u
If you are installing two SIMMs, install them in the Bank 0 sockets.
u
If you are installing four SIMMs, install them in the Bank 1 sockets first, and then in the Bank
0 sockets.
u
If you are installing eight SIMMs, install the first SIMM in Bank 3 socket J58. Install each
remaining SIMM in the next empty socket until Bank 0 socket J51 is the last socket populated.