Intergraph TD-x10 Setup, Справочное руководство системы

Страница: 70 / 98

60
The spare interrupts listed above may be assigned to PCI and ISA devices. When you add a PCI device
to the system, the interrupt will be automatically assigned by the system BIOS. However, at least one
interrupt must be available for the PCI bus. For increased performance, one interrupt should be left
available for each PCI based controller used in the system. When you add a ISA board, you must
assign the interrupt using the System Configuration Utility and jumpers on the option board.
External Ports
The following figures show the external ports in their proper orientation, when the base unit is in the
upright position.
MIDI Pinout
Pin Signal Pin Signal
1 +5V 9 +5V
2 Fire button 0 10 Fire button 2
3 X-axis, joystick 1 11 X-axis, joystick 2
4 Ground 12 MIDI out
5 Ground 13 Y-axis, joystick 2
6 Y-axis, joystick 1 14 Fire button 3
7 Fire button 1 15 MIDI in
8 +5V
Ethernet Pinout
Pin Signal Pin Signal
1 TD+ - Transmit 5 Reserved
2 TD– - Transmit 6 RD– - Receive
3 RD+ - Receive 7 Reserved
4 Reserved 8 Reserved
15
9
1
8
1
8