Intergraph TD-x10 Setup, Справочное руководство системы

Страница: 78 / 98

68
4. Any combination of +3.3 V, +5.1 V, and +12 V do not exceed their maximum or 539 watts of total
power.
5. The sum of Initial Setting Tolerance and Line/Load Regulation does not exceed 3% for the
+3.3 V output, 3% for the +5.1 V output, 5% for the +12.0 V output, and 10% for the negative
output voltages.
Cable Connectors
The following table shows the cable connectors from the power supply that connect to the riser card
and to the devices in the system.
The following table shows the cable connectors from the power supply that connect to the riser card
and to the devices in the system.
Connector Device Connector Device
P1 Riser Card P6 Auxiliary Drive
(or RAID section)
P2 CD-ROM Drive P7 Auxiliary Drive
P3 Auxiliary Drive P8 Auxiliary Drive
P4 Auxiliary Drive
(or RAID section) P9 Combo Drive
P5 Auxiliary Drive
P1 Pinout
Pin Signal Wire Color Pin Signal Wire Color
1 +3.3V Orange 13 +5V Red
2 +3.3V Orange 14 Ground Black
3 +3.3V Orange 15 Ground Black
4 Ground Black 16 +5V Red
5 Ground Black 17 Ground Black
6 Ground Black 18 -12V Blue
7 +3.3V Orange 19 +5V Red
8 +3.3V Orange 20 -5V Red
9 +5V Red 21 Ground Black
10 Ground Black 22 +12V Yellow
11 +5V Red 23 Ground Black
12 Ground Black 24 Power
Good Green
P2 - P8 Pinout
Pin Signal Wire Color
1 +12V Yellow
2 Return Black
3 Return Black
4 +5V Red