Intergraph InterServe 05 Setup, Руководство по установке

Страница: 36 / 75

23
4. When installation completes successfully, select OK.
5. Restart the system.
Installing the System Introduction
After configuring the operating system, you may install the online System Introduction. Once
installed, you can use it to learn about the features and basic operation of your system. Install
the document from the diskette you created using Version Manager (refer to Chapter 1 for
information about Version Manager).
To install the System Introduction:
1. Insert the diskette containing the System Introduction into the floppy disk drive.
2. In the Windows NT File Manager, copy the files from the diskette to the
C
:\
WIN32APP
\
SYSINTRO
directory.
3. In File Manager, drag the
SYSINTRO
.
HLP
file from the
C
:\
WIN32APP
\
SYSINTRO
directory in
File Manager to the Main group of Program Manager. This creates an icon for the
System Introduction.
To view the System Introduction, open the System Introduction icon. The System
Introduction is a Windows Help 4.0 document.
NOTE You can also view the
System Introduction by opening the
SYSINTRO
.
HLP
file in the
C
:\
WIN
32
APP
\
SYSINTRO
directory on your system. You may want to link the
SYSINTRO
.
HLP
file to
an icon, a shortcut, or a system menu to make it easier to display.
Configuring Networking
The system is equipped with an on-board Ethernet network adapter. Before you configure
networking, ensure that the system is connected to the network.
To configure Networking, open Network in the Control Panel. Follow the instructions in the
dialogs to set up the system to use a network. Be sure to set up the appropriate network
protocols, such as TCP/IP and NetBEUI, for the network to which the system is connected.
Refer to the operating system documentation and Help for detailed information on setting up
the operating system to use a network.