Intergraph InterServe 05 Setup, Руководство по установке

Страница: 33 / 75

20
Installing MegaRAID Power Console Software
To monitor and administer the system’s RAID disk array while running Windows NT Server,
you must install the MegaRAID Power Console software after configuring Windows NT
Server. Install the software from the diskette you created using Version Manager (refer to
Chapter 1 for information about Version Manager). Refer to the InterRAID documentation
for instructions on how to use Power Console.
To install MegaRAID Power Console software:
1. Log on to Windows NT using an administrative account.
2. Insert the diskette containing the MegaRAID Power Console utility into the floppy disk
drive.
3. In the Windows NT File Manager, run
SETUP
.
EXE
on the diskette.
4. Respond yes or no appropriately to the questions about Windows NT. At the Welcome
dialog, select Next. The MegaRAID Install Destination Path dialog displays.
5. If you agree with the destination directory, select Next. Otherwise, select Browse and
enter a new directory path. The files are copied in the directory named \MEGARAID (or
where you specify) and the MegaRAID program group is created. Setup also displays a
message that the driver is already present on the system.
6. To run Power Console, open MegaRAID in the MegaRAID group of Windows NT
Program Manager.
For information on configuring and using the RAID disk drives, refer to the InterRAID
documentation delivered with the system.
Ensuring PC Card Support and Operation
The PC Card slot in the optional combo drive is used with devices based on standards
developed by the Personal Computer Memory Card International Association (PCMCIA).
Windows NT Server provides support for PC Card devices. Refer to the operating system
documentation and Help for more information on PC Card device support.
CAUTION You must shut down the system before inserting a PC Card device in the PC Card slot. When
you restart the system, Windows NT Server will recognize the PC Card device.
If you will be using a PC Card hard disk device (ATA or AT type) with a system running
Windows NT Server, you should ensure the device drivers that control PC Card hard disk
operation are set to start correctly. On a system running Windows NT Server 4.0, the Atdisk
device and the Pcmcia device should be set to start as System devices.