Intergraph ExtremeZ GL1, Настройка системы

Страница: 98 / 110

84
Memory Addresses
Address Range (hex) Size Assignment
00000000-0009FBFF 640 KB System board extension for PnP BIOS
0009FC00-0009FFFF 1 KB System board extension for PnP BIOS
000A0000-000AFFFF 64 KB Cirrus Logic 5430/40 PCI
000B0000-000BFFFF 64 KB Cirrus Logic 5430/40 PCI
000C0000-000C7FFF 32 KB Unavailable for use by devices
000E0000-000FFFFF 128 KB System board extension for PnP BIOS
00100000-07FFFFFF 128 MB System board extension for PnP BIOS
FA800000-FC8FFFFF 32 MB DEC 21052 PCI to PCI bridge
FB000000-FBFFFFFF 16 MB Cirrus Logic 5430/40 PCI
FCA00000-FEAFFFFF 33 MB DEC 21052 PCI to PCI bridge
FEAF8000-FEAFFFFF 32 KB Standard PCI graphics adapter
FEC00000-FEC00FFF 4 KB System board extension for PnP BIOS
FEE00000-FEE00FFF 4 KB System board extension for PnP BIOS
FFFE0000-FFFFFFFF 128 KB System board extension for PnP BIOS
Using System Resources
Most ISA devices installed in the system require you to reserve an IRQ. PCI devices also
need to use an IRQ, but since they share system resources they can use the same IRQ. At
least one IRQ must be left unassigned, for use with any PCI devices installed in your system.
The system has a limited number of open IRQs. To install more ISA devices than you have
open IRQs, you must disable one unused system port for each excess ISA device, unless the
device does not require an IRQ.
To reserve an IRQ for an installed device:
1. Restart the system and start the BIOS Setup program.
2. On the PCI/PnP screen, select the IRQ you want to reserve.
3. Change the setting for the selected IRQ to
ISA/EISA
.
4. Save the changes and exit from the BIOS Setup program.