Intergraph ExtremeZ GL1, Настройка системы

Страница: 93 / 110

79
driver software. Install the driver software from the 3
COM
3
C
90
X
diskette, which is delivered
as backup media in InterSite Version Manager or in the 3Com network adapter kit.
Enabling Bus Mastering for IDE/ATAPI Devices
Your system shipped with bus mastering for IDE/ATAPI devices enabled. If you reinstall
Windows 95, you should enable IDE/ATAPI bus mastering.
NOTE If you have a CD-Recorder drive installed, do not enable IDE/ATAPI bus mastering. The CD-
Recorder drive is incompatible with IDE/ATAPI bus mastering.
To enable IDE/ATAPI bus mastering:
1. Go to Start/Settings/Control Panel/System/Device Manager/Disk Drives.
2. Click a disk drive, then click Properties, and then click Settings.
3. Click the DMA check box, and then click OK.
4. Repeat steps 2 and 3 for any additional disk drives.
5. In Device Manager, click the CD-ROM drive, then click Properties, and then click
Settings.
6. Click the DMA check box, and then click OK.
7. Restart the system.
Updating the Operating System
Microsoft Service Packs and Service Releases contain the latest improvements and system
fixes for Microsoft operating systems. Service Packs and Releases are created by Microsoft
for post-release support. You can obtain them from Microsoft’s World Wide Web and FTP
sites free of charge.
CAUTION If Intergraph provides a Service Pack or Service Release through the IBBS or with a product
or system, it has been certified against Intergraph hardware as described in the
announcement of its availability. If you obtain a Service Pack or Service Release from any
other source, be aware that it may not be certified against your Intergraph hardware.