Intergraph ExtremeZ GL1, Настройка системы

Страница: 56 / 110

42
Setting Description
ECP The parallel port can be used with devices that adhere to the Extended
Capabilities Port (ECP) specification. ECP uses the DMA protocol to achieve
data transfer rates up to 2.5 Megabits per second. ECP provides symmetric bi-
directional communication.
The Optimal and Fail-Safe settings are Normal.
Onboard IDE
This option specifies the IDE channel used by the on-board IDE controller. The settings are
Disabled, Primary, Secondary, or Both. The Optimal and Fail-Safe settings are Both.
Security Menu
Use the options in the Security Menu to change the system password for the Supervisor and
the User.
Supervisor, User
To prevent unauthorized users from accessing BIOS Setup, you can enter a password on both
of the Supervisor and User menus. If you do not enter a password, the system will not
prompt users for a password when they run BIOS Setup. These passwords do not affect the
system logon password.
NOTE The Advanced Setup menu contains the Password Checking option that enables the system
to use the passwords you enter.
To enter a password:
1. Select the Password icon. The Password menu displays.
2. Type the characters (maximum of six) for the password, and then press
ENTER
.
3. Re-type the password to confirm it and press
ENTER
.
To disable a password:
1. Select the Password icon.
2. Type in the current password, and press
ENTER
.
3. Press
ENTER
twice. A message displays notifying you that the password is disabled.