Interactive Technologies Concord Express, Руководство пользователя, Страница: 5 / 34

5
(See the section on “Preventing Accidental Alarms” on page 6 if
you would like to be able to leave quickly when the system is
armed.)
• To stop sirens and cancel an alarm. When an alarm condition
occurs, disarming the system turns off any sirens.
To disarm to Level 1—OFF using a touchpad:
1. Press
1
. Touchpads display “Enter Code.”
2. Enter your access code.
Touchpads display date and time or programmed text.
3. The system sounds one long beep.
Arming Level 2—STAY
There are times when you want intrusion protection, but still want
the freedom to move around within your house without setting off
an alarm. For example, in the evening when your family is inside
for the night. In this and similar situations, arm your system to
2—STAY.
To arm to Level 2—STAY using a touchpad:
1. Close all protected perimeter doors and windows.
2. Press
2
at any touchpad. Touchpads display, “Enter Code.”
3. Enter your access code. Touchpads display,
”Armed to STAY.”
4. The system sounds two short beeps.
5. If leaving the premises, exit through a designated delay door
immediately.
Arming Level 3—AWAY
At other times, you want every sensor to be alert: When the family
is away from home, or, in a business, after closing time.
In this and similar situations, set your system to 3—AWAY for maxi-
mum protection. All sensors are active—perimeter door and win-
dow sensors, and interior motion detectors.
To arm to Level 3—AWAY using a touchpad:
1. Close all perimeter doors and windows.
2. Press
3
at any touchpad. Touchpads display, “Enter Code.”
3. Enter your access code. Touchpads display,
”Armed to AWAY.”
4. The system sounds three short beeps.
5. Exit through a designated delay door immediately.
Q
UICK
A
RM
Your system may be set up so that you’re able to arm the
system without using an access code.
To use Quick Arm:
• Increase the arming level by simply pressing
2
or
3
at any touchpad.
Decreasing the arming level requires that the user enter a code.
S i m p l y p r e s s o r
t o i n c r e a s e t h e a r m i n g l e v e l .
T o d e c r e a s e t h e a r m i n g
l e v e l , y o u ' l l n e e d t o e n t e r
a n a c c e s s c o d e .
C o n t a c t y o u r d e a l e r i f y o u ' d
l i k e t o u s e t h i s f e a t u r e .
Stay
2
Away
3
2 3
K
EYCHAIN
T
OUCHPAD
A
RMING
To disarm your system with a keychain
touchpad, press the Unlock button.
Your installer can set up your keychain
touchpad to arm the system in one of two ways:
1. Press the Lock button to arm the system directly to Level 3
with no Exit delay. Using this method, you would not be
able to arm to Level 2.
2. Press the Lock button to increase the arming level each
time it is pressed (Level 1 to Level 2, or Level 2 to Level 3).
The Exit delay time would be applied.
Q
UICK
E
XIT
Note: In UL Listed systems, this feature is disabled.
Your system may be set up so that when your system is armed
to Level 2—STAY, you’re able to press
D
on any touchpad
and simply walk out of the door without having to disarm and
rearm the system.
This is useful when your system is armed and you want to
quickly pop outside to pick up the newspaper without disarm-
ing your system.
IMPORTANT: If you step outside and are planning to come
back in, do not close the door behind you!
To use Quick Exit:
1. When the system is armed to 2—STAY, press
D
at any
touchpad. Opening the door without pressing
D
will cause an alarm.
2. Open the door and go outside.
Leave the door open if you are planning to come back in!
3. Come back in within two minutes and close the door.
The system will rearm to 2—STAY.
I n L e v e l 2 — S T A Y , s i m p l y p r e s s
b e f o r e o p e n i n g t h e d o o r .
T h e d o o r m u s t b e c l o s e d a g a i n
w i t h i n 2 m i n u t e s t o a v o i d a l a r m .
C o n t a c t y o u r d e a l e r i f y o u ' d
l i k e t o u s e t h i s f e a t u r e .
D
D