Interactive Technologies Concord Express, Руководство пользователя, Страница: 13 / 34

13
Event Code in Page
This part of the page let’s you know what has happened.
Table 1. Event Codes in Pages
Sensor Number or User Number in Page
This part of the page let’s you know who or what is causing the
event.
Table 2. Sensor Numbers or User Codes in Pages
Account Number in Page
This part of the page let’s you know where the event is occurring.
Table 3. Account Number
Some pager providers transmit only numbers and not alpha-charac-
ters. If your account number contains alpha-characters, check with
your provider to see exactly how your account number will appear
on your pager.
Streamlining the Page
If you feel that it is not necessary to see your account number with
each page from your system, you may elect to have the Streamlin-
ing feature turned on. Your page will contain only an event code
(Table 1) and a sensor or user number (Table 2).
Ask your dealer or installer if you would like the Streamline feature
turned on.
Sample pager message with the
Streamline feature turned on:
O
PENING AND
C
LOSING
R
EPORTS
The Opening and Closing Reports feature allows up to three pager-
holders and/or the central station to be notified whenever the sys-
tem is armed and/or disarmed. Refer to the Appendix A User
Sheets to see which pagers have been set up to receive a page for
this feature.
The Opening and Closing Reports feature can be enabled only by
the installer.
If the feature is on, pagerholders will receive:
• an Opening Report page every time the system is disarmed:
111 for Level 1—OFF, and the user code entered.
• a Closing Report page every time a user arms the system:
222 for Level 2 or 333 for Level 3, and the user code entered.
See “Notification by Pager” on page 12 for more information on
paging reports.
Code Indicates
009
A sensor has been restored to its non-alarm state
1 1 1
System has been disarmed
1 1 8
System trouble has been fixed
1 1 9
System alarm condition has been cancelled
222
System armed to Level 2
333
System armed to Level 3
555
System phone test
888
System has a trouble condition
999
System is in alarm condition
Code Indicates
000
System event not caused by a sensor or user
001
—
024
Sensor numbers 1 through 24
600
—
615
User codes 00 through 15 used
678
System Master code used
679
Installer code used
680
Dealer code used
697
Quick Arm used
698
Keyswitch sensor used
699
System armed itself because it is being serviced
or powered-up
Code Indicates
XXXX
4-digits of account number
S e n s o r n u m b e r o r u s e r n u m b e r
E v e n t c o d e