Interactive Technologies Concord Express, Руководство пользователя, Страница: 15 / 34

15
T
ESTING THE
S
YSTEM
The system contains a test mode that allows you to test sensors and
panic signals without creating false alarms. Test your system weekly,
by following the instructions in this section carefully.
Automatic Test Features
Your security system conducts routine tests, checking for problems
like power failures, low batteries, sensors that aren’t working, and
communication trouble with the central monitoring station.
When your system detects a problem, trouble beeps sound to alert
you. See “Troubleshooting” on page 16 for an explanation of the
causes of trouble beeps and what you can do to fix the problem.
Manual Tests
The automatic tests your system performs provide continuing reas-
surance that it is working properly. There are also weekly system
tests you can do yourself as an added safeguard. Taking time to do
these tests will familiarize you with your system and alert you to
anything unusual, such as cut phone lines or sensors that have
been tampered with.
Sensor Test
This test verifies that the sensors in your system are operating cor-
rectly.
The ability to conduct a sensor test is a code attribute given per
User code. Check the Appendix A User Sheets to see which
access codes have the ability to conduct a sensor test.
Table 3. Sensor Test Procedure
1. Enter Test Mode by pressing
8
+ Code +
3
.
Touchpads display, “Press Status. System Armed to Sensor Test,” or
“
✽ ✽
SENSOR TEST nn MINUTES LEFT.”
When less than 5 minutes remain to the Test Mode time, the system sounds a short beep
every 60 seconds.
2. Follow the test procedure for each device.
Device Test procedure Touchpad Result
Touchpads Send a: Police panic alarm,
Fire panic alarm, and
Auxiliary panic alarm. Touchpad Panic POLICE OK
Touchpad Panic FIRE OK
Touchpad Panic AUXILIARY OK
POLICE PANIC OK
FIRE PANIC OK
AUXILIARY PANIC OK
Wireless Touchpads Press the Bypass key. Zones nn OK
Touchpad nn OK
Keychain Touchpads Press and hold the two assigned panic buttons simultaneously
for 3 seconds. Touchpad Panic POLICE OK
Touchpad Panic AUXILIARY OK
POLICE PANIC OK
AUXILIARY PANIC OK
Panic buttons Press and hold the appropriate panic button(s) for 3 full sec-
onds. Zones nn OK
SENSOR nn OK
Door/window
sensor Open the secured door or window. Zones nn OK
SENSOR nn OK
Smoke detector Press and hold the test button until the system sounds transmis-
sion beeps. Zones nn OK
SENSOR nn OK
Motion
detector Avoid the motion detector’s view for 5 minutes, then enter its
view. Zones nn OK
SENSOR nn OK
Rate-of-Rise Heat
Detector
(Not UL investigated) Rub your hands together until warm, then place one hand on
the detector for 30 seconds. Zones nn OK
SENSOR nn OK
Shock sensor
(Not UL investigated) Tap the glass twice, away from the sensor. Wait at least 30 sec-
onds before testing again. Zones nn OK
SENSOR nn OK