Interactive Technologies Concord Express, Руководство пользователя, Страница: 12 / 34

12
Adjusting the Touchpad Beeps
The frequency or pitch of chime and trouble beeps from each fixed
English touchpad can be adjusted individually to a more desirable
or distinct tone.
Chime and trouble beep tones sound using the default frequency
during, or within 15 seconds of any button activity at that specific
touchpad.
To change status tone pitch:
1. Press and hold the
‚
and
0
until you hear a steady tone,
then release the buttons.
2. Press and hold
1
to lower the pitch or press and hold
2
to
raise the pitch.
3. Release the button when the desired pitch is heard.
After about 15 seconds of no touchpad activity, the steady tone
stops sounding.
Adjusting the Touchpad Display Brightness
You may want to change the brightness of a touchpad display
based on its location in a building or room. For example, dim the
touchpad display in a bedroom or enhance a display near a win-
dow.
Changing the touchpad display affects only the touchpad currently
being used.
To change touchpad display brightness:
1. Enter the programming menus by pressing
9
+ System Master Code.
2. Press
2
+
2
.
3. Select a brightness level:
•
0
+
ƒ
Off
•
1
+
ƒ
Low
•
2
+
ƒ
Medium
•
3
+
ƒ
High
4. Press
‚
+
4
+
ƒ
to exit the programming menus.
After dimming the display, pressing any button momentarily returns
the display to full brightness. After 15 seconds without touchpad
activity, the display returns to the set dimmed level. If an alarm
occurs while the display is dimmed, it automatically returns to the
full brightness level and stays that way until you disarm your system.
N
OTIFICATION BY
P
AGER
Your system can notify up to three different pager phone numbers
to report system events. The installer can program any pager to
receive pages for one or more of the following groups:
• High Level Reports,
which includes the following reports:
– Sensor alarms
– Bus failures
– Sensor Tamper – No activity alarm
– Sensor Restorals – Fire panic
– Phone test – Police panic
– Receiver failure – Auxiliary panic
– Receiver jam – Duress alarm
– Touchpad tamper
• Low Level Reports,
which includes the following reports:
– Bypass sensors
– AC power fail
– Low battery – CPU low battery
– Sensor Supervisory – Auto phone test
– Trouble – CPU back in service
– Phone test – Phone Failure
– Touchpad supervisory – Event buffer full
– Touchpad low battery – Force armed
– Force armed (reports when a user bypasses
sensors while arming system)
• Opening and Closing reports
• Latchkey Paging
Pager Messages
When an event is reported on a numeric pager, the following infor-
mation is included:
Although all three types of information can be reported on your
pager, your pager service determines how the information will actu-
ally appear.
S e n s o r n u m b e r o r u s e r n u m b e r
E v e n t c o d e L a s t f o u r d i g i t s o f c e n t r a l
s t a t i o n a c c o u n t n u m b e r