Interaction Media Server Appliance Installation and Configuration Guide
11
Set up the Interaction Media Server appliance
After you confirm the Interaction Media Server appliance contents, review safety precautions, and
understand where to obtain help and additional resources information, you are ready to set up the
Interaction Media Server appliance.
In this section, you will learn how to:
•
Perform the preliminary hardware setup
•
Complete the Windows server OS installation
•
Locate the Interaction Recovery Module
•
Add the server to the domain
•
View Network Fault Tolerant (NFT) Network Interface Controller teams
•
Retrieve the required Interaction Media Server licenses
•
Apply the Interaction Media Server license and the Interaction SIP Proxy Server license
Preliminary hardware setup
When the Interaction Media Server appliance arrives, unpack it and connect it to the appropriate
Ethernet network.
1.
Unpack the appliance and install it on a rack with monitor and keyboard access.
2.
Connect the appliance to the network.
3.
Turn on the appliance. The machine runs through a series of installation and system settings
applications and then reboots. The
Set Up Windows
wizard opens.
Complete the Windows Server installation
This section describes how to run the
Set Up Windows
wizard and perform other tasks to
complete the Windows Server 2008 R2 operating system installation.
1.
Run the
Set Up Windows
wizard. The system installs applicable devices, applies system
settings, and reboots the machine. When the system reboots, the
Set Up Windows
dialog
opens.