Interaction Media Server Appliance Installation and Configuration Guide
13
Interaction Recovery Module
(Medium and Large Interaction Media Servers only)
This Interaction Media Server appliance is equipped with a factory restore feature using an internal
USB flash drive (“Interaction Recovery Module”). This module does not appear under
My
Computer
but is visible in the
Disk Management console
as the
ININ_RECOV
volume.
Important
: Do not attempt to mount or modify the contents of the Interaction Recovery Module.
Doing so may result in the inability to restore the system to its factory state in the future.
For instructions on how restore the appliance (operating system and/or any Interactive Intelligence
software) to its factory state using the Interaction Recovery Environment software stored on the
Interaction Recovery Module, see the
Factory Image Restoration Procedures
technical reference
included with the Interaction Media Server appliance.
Add the server to the domain
This section describes how to join the Interaction Media Server appliance to the domain.
1.
Open the
Start
menu and select
Computer
. The
Computer
dialog opens.
2.
Select
System properties
. The
System
dialog opens.
