Interacoustics VisualEyes 505 Скачать руководство пользователя

Страница: 35 / 125

D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN

Page

2.6.6 VORTEQ™ 2nd eneration IMU (optional)

The VORTEQ™ 2

Generation IMU is delivered with the VORTEQ™

Assessment and VORTEQ™

Diagnostic modules, and is used to measure the patient’s head movement and positioning in space during

testing. The VORTEQ™

Assessment module can be added to VisualEyes™ 505, 515, and 525, and the

VORTEQ™ Diagnostic module can be added to VisualEyes™ 525.

The VORTEQ™ 2

Generation IMU can be connected to the computer either by USB cable or wirelessly

through Bluetooth with the accompanying Bluetooth receiver dongle.

The IMU can be attached to the VNG goggle by sliding the IMU into the goggle mount. The VORTEQ™ 2

Generation IMU is not compatible with the front mount goggle.

VORTEQ™

Assessment also comes with a headband used for

Dynamic Visual Acuity

testing. This has a

similar mount for the IMU as the one attached to the VNG goggles.

Figure 2.6-17: VORTEQ™ 2

Generation IMU being mounted on a side mount goggle (left), and mounted on the headband for Dynamic

Visual Acuity (right)

The VORTEQ™ 2

Generation IMU has four LEDs that describe the status of the device:

•

Flashes yellow when powered on

•

CHARGING

Blue light when the battery is charging through the connected USB cable

•

BLE

Broadcasting

: Flashes yellow when bluetooth is broadcasting

•

BLE

Connected

Flashes red when the computer has successfully connected to the device

Figure 2.6-18: VORTEQ™ 2

Generation IMU with LEDs turned on

Hardware setup:

1. Connect the USB cable to VORTEQ™ 2

Generation IMU.

2. Connect the other end of the USB cable to the computer or the USB hub.

3. Power on the IMU by sliding the power switch.

4. Register the VORTEQ™ 2

Generation IMU as ”VORTEQ™ 2nd Gen” in the the VisualEyes™

software, following the instructions in section 2.8:

Hardware registration and licensing

NOTICE:

The VNG goggles must be registered and licensed before the VORTEQ™ 2

Generation

IMU. If prompted for a license when registering the VORTEQ™ 2

Generation IMU, leave this empty

and click ”close”.

5. Go to

System Default Settings > Head Sensor

, and ensure the

Head Sensor Type

is set as

”Micromedical VORTEQ™ 2nd Generation IMU”.

Содержание VisualEyes 505






























































































































Результаты поиска

Содержание VisualEyes 505

Отзывы:

Похожие инструкции для VisualEyes 505

Бренды по названию

Популярные бренды

Interacoustics VisualEyes 505, Инструкция по эксплуатации

Результаты поиска

Содержание VisualEyes 505

Отзывы:

Похожие инструкции для VisualEyes 505

Бренды по названию

Популярные бренды