Intel SR2600URLX, Руководство по обслуживанию

Страница: 73 / 228

Intel
®
Server System SR2600UR/SR2625UR Service Guide 53
7. Install the PCI add-in card(s), if desired. For instructions, see “Installing a PCI
Add-in Card” on page 54 .
8. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 51 .
9. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Installing a PCI Riser Card
To install a PCI riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
“Removing the PCI Riser
Assembly” on page 50 .
3. Remove any add-in cards from the PCI riser card. For instructions, see “Removing
a PCI Add-in Card” on page 55 .
4. Press and hold the blue riser locking lever in that position (see letter “A” in
Figure 35 ).
5. Place the riser card onto the retention pins (see letter “B” in Figure 35 ).
6. Slide the riser card in the direction shown to lock it into place (see letter “C” in
Figure 35 ).
Figure 35. Installing PCI Riser Card into the Server System
7. Release the blue locking lever.
8. Install the PCI add-in card(s), if desired. For instructions, see
“Installing a PCI
Add-in Card” on page 54 .
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 51 .
AF00 3 01 3
Riser Ca
rd
A
Riser Retention Pin
B
C