manualshive.com logo in svg

Intel SBFCM, Руководство по техническому обслуживанию аппаратной части

"Intel SBFCM - техническое руководство по обслуживанию оборудования, которое можно бесплатно скачать с manualshive.com. Руководство по обслуживанию оборудования содержит все необходимые инструкции и рекомендации для правильного ухода за вашим устройством. Узнайте больше о вашем оборудовании с помощью этого руководства."

Поделиться
Скачать
background image

 84

SBCEFCSW/SBFCM: HMM and Troubleshooting Guide 

 

•

Virtual private fabric (VPF) - hard zone

Soft zoning

Soft zoning divides the fabric for purposes of controlling discovery. Members of the same soft zone 
automatically discover and communicate freely with all other members of the same zone. The soft 
zone boundary is not secure; traffic across soft zones can occur if addressed correctly. Soft zones 
that include members from multiple switch modules need not include the ports of the interswitch 
links. Soft zone boundaries yield to ACL and VPF zone boundaries. Soft zones can overlap; that is, a 
port can be a member of more than one soft zone. Membership is defined by Fibre Channel address, 
port ID and domain ID, or worldwide name. Soft zoning supports all port modes.

Access control list zones

Access control list (ACL) zoning divides the fabric for purposes of controlling discovery and 
inbound traffic. ACL zoning is a type of hard zoning that is hardware enforced. This type of zoning 
is useful for controlling access to certain devices without totally isolating them from the fabric. 
Members can communicate with each other and transmit outside the ACL zone but cannot receive 
inbound traffic from outside the zone. The ACL zone boundary is secure against inbound traffic. 
ACL zones can overlap; that is, a port can be a member of more than one ACL zone. ACL zones that 
include members from multiple switch modules need not include the ports of the interswitch links. 
ACL zone boundaries supersede soft zone boundaries but yield to VPF zone boundaries. 
Membership can be defined only by port ID and domain ID. ACL zoning supports all port modes 
except TL_Ports.

Virtual private fabric zones

Virtual private fabric (VPF) zoning divides the fabric for purposes of controlling discovery and both 
inbound and outbound traffic. This type of zoning is useful for providing security and reserving 
paths between devices to guarantee bandwidth. VPF zoning is a type of hard zoning that is hardware 
enforced. Members can transmit to and receive only from members of the same VPF zone. The VPF 
zone boundary is secure against both inbound and outbound traffic. VPF zones that include members 
from multiple switch modules must include the ports of the interswitch links. VPF zones cannot 
overlap; that is, a port can be a member of only one VPF zone. VPF zone boundaries supersede both 
soft and ACL zone boundaries. Membership can be defined only by port ID and domain ID. VPF 
zoning supports all port modes.

✏ 

NOTE

Domain ID conflicts can result in automatic reassignment of switch module domain IDs. 
These reassignments are not reflected in zones that use domain ID and port number pairs or 
Fibre Channel addresses to define their membership. Be sure to reconfigure zones that are 
affected by a domain ID change. To prevent zoning definitions from becoming invalid when 
the membership is defined by domain ID/port number or Fibre Channel address, you must 
lock domain IDs.

Aliases

To make it easier to add a group of ports or devices to one or more zones, you can create an alias. An 
alias is a named set of ports or devices that are grouped together for convenience. Unlike zones, 
aliases impose no communication restrictions between its members. You can add an alias to one or 
more zones. However, you cannot add a zone to an alias, nor can an alias be a member of another 
alias.

Содержание SBFCM















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SBFCM

2N OfficeRoute Quick Manual preview
OfficeRoute
Бренд: 2N Страницы: 11
2N stargate How To Set preview
stargate
Бренд: 2N Страницы: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Бренд: 2N Telekomunikace Страницы: 24
NAIM AV2 Update Instructions preview
AV2
Бренд: NAIM Страницы: 2
IEI Technology PCIE-Q470 Quick Installation Manual preview
PCIE-Q470
Бренд: IEI Technology Страницы: 19
IEI Technology KINO-DH420 User Manual preview
KINO-DH420
Бренд: IEI Technology Страницы: 87
IEI Technology HPE-4S2 Quick Installation Manual preview
HPE-4S2
Бренд: IEI Technology Страницы: 3
S&T kontron COMe-cEL6 User Manual preview
kontron COMe-cEL6
Бренд: S&T Страницы: 99
IDT USB-BRIDGEV2-EVAL Evaluation Board Manual preview
USB-BRIDGEV2-EVAL
Бренд: IDT Страницы: 11
Medel RONDO 3 Quick Manual preview
RONDO 3
Бренд: Medel Страницы: 28
Rane HAL1x System Installation Manual preview
HAL1x
Бренд: Rane Страницы: 128
Acard AEC-6885 User Manual preview
AEC-6885
Бренд: Acard Страницы: 34
Shure DFR22 Software Manual preview
DFR22
Бренд: Shure Страницы: 113
ICOP Technology Vortex86SX VSX-6100 User Manual preview
Vortex86SX VSX-6100
Бренд: ICOP Technology Страницы: 50
VCS VIP 1000 User Manual preview
VIP 1000
Бренд: VCS Страницы: 118
Observint NVR16 Firmware User Manual preview
NVR16
Бренд: Observint Страницы: 117
B&B Electronics PCMCIA 232PCC2 Owner'S Manual preview
PCMCIA 232PCC2
Бренд: B&B Electronics Страницы: 24
MESA Electronic 4C24 Manual preview
4C24
Бренд: MESA Electronic Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды