Intel S875WP1-E Скачать руководство пользователя страница 93

Страница: 93 / 117

S875WP1-E TPS

BIOS Setup Program

Revision 4.0

7.1.6 Boot

Menu

To access this menu, select Boot from the menu bar at the top of the screen.

Maintenance

Main

Advanced Security

Power

Boot

Exit

The menu represented in Table 61 is used to set the boot features and the boot sequence.

Table 61. Boot Menu

Feature Options

Description

Silent Boot

•

Disabled (default)

•

Enabled

Disabled displays normal POST messages.

Enabled displays OEM graphic instead of POST messages.

AddOn ROM Display
Mode

•

Enabled (default)

•

Disabled

Intel

Rapid BIOS Boot

•

Disabled

•

Enabled (default)

Enables the computer to boot without running certain POST tests.

Scan User Flash Area

•

Disabled

•

Enabled (default)

Enables the BIOS to scan the flash memory for user binary files
that are executed at boot time.

PXE Boot to LAN

•

Disabled (default)

•

Enabled

Enables PXE boot.

USB Boot

•

Disabled

•

Enabled (default)

Enables the computer to boot from USB boot devices.

Boot Device Priority

Select to display
submenu

Specifies the boot sequence from the available types of boot
devices.

Removable Devices

Select to display
submenu

Specifies the boot sequence from the available removable devices.

ATAPI CD-ROM Drives Select to display

submenu

Specifies the boot sequence from the available ATAPI
CD-ROM drives.

Содержание S875WP1-E






















































































































Результаты поиска

Содержание S875WP1-E

Отзывы:

Intel S875WP1-E, Спецификация, Страница: 93 / 117

Результаты поиска

Содержание S875WP1-E

Отзывы: