Intel S875WP1-E Скачать руководство пользователя страница 73

Страница: 73 / 117

S875WP1-E TPS

BIOS Setup Program

Revision 4.0

Feature Options

Description

Memory Mode

No options

Displays whether interleaved or single-channel memory mode is
in place.

DIMM Slot 1A

DIMM Slot 2A

DIMM Slot 1B

DIMM Slot 2B

No options

Displays the amount and type of DIMMs in the memory banks.

Memory Configuration

•

Non-ECC

•

ECC

Allows the user to enable error reporting in the system and all
installed memory supported ECC. If non-ECC memory is
installed, BIOS will detect and change the setting to non-ECC.

Language

•

English (default)

•

Español

Selects the current default language used by the BIOS
(Deutsch, Italiano, and Français available via .lng files).

System Time

•

Hour, minute, and

second

Set current time. Use the Tab key to navigate fields

System Date

•

Day of week

Month/day/year

Set current date. Use the Tab key to navigate fields.

NOTE

Additional language support is available. For more information visit Intel’s support web site at:

www.support.intel.com/support/motherboards/server/S875WP1-E

Содержание S875WP1-E






















































































































Результаты поиска

Содержание S875WP1-E

Отзывы:

Intel S875WP1-E, Спецификация, Страница: 73 / 117

Результаты поиска

Содержание S875WP1-E

Отзывы: