manualshive.com logo in svg

Intel S875WP1-E, Спецификация, Страница: 3 / 117

Поделиться
Скачать
Intel S875WP1-E Скачать руководство пользователя страница 3

S875WP1-E TPS 

Disclaimers 

 

Revision 4.0

 

 

 

 

iii

 

Disclaimers 

Information in this document is provided in connection with Intel

®

 products. No license, express 

or implied, by estoppel or otherwise, to any intellectual property rights is granted by this 
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel 
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to 
sale and/or use of Intel products including liability or warranties relating to fitness for a particular 
purpose, merchantability, or infringement of any patent, copyright or other intellectual property 
right. Intel products are not intended for use in medical, life saving, or life sustaining 
applications. Intel may make changes to specifications and product descriptions at any time, 
without notice. 

The S875WP1-E may contain design defects or errors known as errata which may cause the 
product to deviate from published specifications.

 

Current characterized errata are available on 

request. 

Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation. 

*Other brands and names may be claimed as the property of others. 

Copyright © Intel Corporation 2003.  

 

Содержание S875WP1-E






















































































































Отзывы:

Нет отзывов