Intel R1000WF Series, Руководство по системной интеграции и обслуживанию

Страница: 61 / 125

Intel ® Server System R1000WF Product Family System Integration and Service Guide
45
3.1.3 Power Cord Retention Strap Installation
Figure 65. Power Cord Retention Strap Installation
1. Locate and remove the power cord retention strap from the system accessory kit.
2. Insert the locking tab end of the Retention Strap into the receiver hole located beneath the power cord
receptacle on the back of the power supply module (see Letter “A”).
Figure 66. Power Cord Plugging
3. While pushing up the locking tab on the bottom of the slider, adjust the slider to the desired position (see
Letter “B”).
4. Install the power cord into the power cord receptacle on the back side of the power supply (see Letter
“C”).
5. Pull the slider strap over the power cord and lock it securely into place (see Letter “D”).
3.1.4 Power Cord Retention Strap Removal
1. Push down on the slider tab to release the slider strap.
2. Pull the slider strap back over the power cord.
3. Remove power cord.