Intel
®
Server System R1000WF Product Family System Integration and Service Guide
19
Figure 28. Processor Clip Sub-assembly to Heat Sink Orientation
8.
Orient the processor clip sub-assembly over the processor heat sink so that all corner features are in
alignment.
Ensure Pin 1 indicators are aligned
as shown in the following figures.
Figure 29. Processor Heat Sink Module (PHM)
9.
Push the processor clip sub-assembly down on to the processor heat sink until it snaps into place,
ensuring all four corners are secure. Processor clip sub assembly should sit flat on top of the heat sink.
2.4.2
Processor Installation
Intel server systems support the installation of 1 or 2 processors. For the server to be operational, CPU #1
must be installed. The installation of CPU #2 is optional, however, to ensure proper airflow when the server
system is operational, the CPU #2 heat sink must be installed at all times. When no processor is installed in a
socket, one of the provided black Mylar spacers should be installed between the processor heat sink and the
processor socket. This is a serviceability feature that identifies that a socket has no processor present when
only a heat sink is installed
Содержание R1000WF Series
Страница 2: ...Intel Server System R1000WF Product Family System Integration and Service Guide Blank Page ...
Страница 16: ......