manualshive.com logo in svg

Intel Omni-Path Director Class Switch Series, Руководство по установке

Поделиться
Скачать
Intel Omni-Path Director Class Switch Series Скачать руководство пользователя страница 81

Service (SVC)

The Chassis Service (SVC) LED indicates the following condition:
•

Green

: Chassis beacon is active

•

Off: Not selected

Master

•

Green

: the module is acting as the master Management Module

•

Off: Management Module is not the Master

MRL Active

•

Green

: the mechanical release latch (MRL) thumbscrew is secured to the

management module, enabling communications with a mated management leaf

module

•

Off: the mechanical release latch (MRL) thumbscrew is not engaged, disabling

communications with a mated management leaf module

Leaf Module LEDs

Figure 66.

Leaf Module LEDs

Port LEDs

•

Green

: The external HFI link is in the Active Port State

•

Off: Link is not active

Module Status

The status LED indicates one of the following conditions:
•

Steady 

Green

: the module is operating normally.

•

Blinking 

Green

: LED test state.

•

Off: module is in the removable state.

Module Attention

The Attention LED indicates one of the following conditions:

2.8.2.2  

Installation—Intel

®

 Omni-Path Fabric

Intel

®

 Omni-Path Fabric Switches Hardware

June 2019

Installation Guide

Doc. No.: H76456, Rev.: 10.0

81

Содержание Omni-Path Director Class Switch Series




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды